Programming IO Link Smart Devices (IEC61131-9)

Short Course / 2 Days

Apply
Course Information
Learning Outcomes
Course Schedule
Lesson Plan
Trainer Profile
Certification
Entry Requirements
Course Fees
Apply
Contact us for more information

Course Information

IO Link-The road to smart maintenance & cost saving cabling

For Individuals
For Employers

Learning Outcomes

Participants will learn how to program the PLC using IEC61131-3 standard and interface with the IO Link Master using the Ethercat protocol to retrieve the sensor status and control the actuators.

_x000D_

_x000D_

They will also learn how to program the HMI to do graphical display of the sensor status and even learn to control the actuators with a click of a button.

Course 
Schedule

Thursday, 9:00 am to 5:00 pm
Friday, 9:00 am to 5:00 pm

Application Date: 28 Jan 2021 to 21 Mar 2021_x000D_
_x000D_
Class Date: 8 April – 9 April_x000D_
_x000D_
Ngee Ann Polytechnic reserves the right to reschedule/cancel any programme, modify the fees and amend information without prior notice.

Lesson Plan

This course consists of 4 modules:

Introduction to IO Link Technology (2 hrs)
    _x000D_

  • Difference between traditional sensors/actuators vs IO Link Sensors/actuators

    • _x000D_

  • Configuration of IO Link devices on PLC

    • _x000D_

Communication between the PLC and IO Link Master (4 hrs)
    _x000D_

  • Setup the communication interface between the PLC and IO Link Master

    • _x000D_

  • Learn to retrieve the data from the different types of IO Link sensors and control the actuators

    • _x000D_

Introduction to HMI programming to interface with the PLC and IO Link Master (4 hrs)
    _x000D_

  • Basics of HMI Programming i.e creating I/O controls and etc and learn to interface with the PLCand IO Link Master

    • _x000D_

  •  Learn how to create the necessary control of the IO Link actuators and display of IO Link sensor values (Process Data) using the HMI

    • _x000D_

Case studies with assessment (4 hrs)

Case Study (work)

Trainer's Profile

Ng Shi Ping

Ng Shi Ping is a senior lecturer with the School of Engineering of Ngee Ann Polytechnic. She teaches automation and mechatronics systems.The engineer-turned-lecturer has over 10 years’ experience in doing machine development, which includes integrating sensors, pneumatic actuators, motion control cards, designing vision processing algorithm and finite state machines for mechanical motion. Shi Ping has been a full-time lecturer with the Polytechnic since 2014 teaching Industrial Automation, C programming, Microcontroller and interfacing, Electrical and Electronic Technology, etc

Certification

In-class assessments.

_x000D_



_x000D_


A Certificate of Performance will be awarded to participants who achieve at least 75% attendance and pass all required assessment(s).

_x000D_



_x000D_


A Certificate of Participation will be awarded to participants who meet the 75% attendance requirement but did not pass all required assessment(s).

Entry Requirements

Applicants with any of the following qualifications are invited to apply for the course:

Applicants should preferably have a basic logic circuit knowledge in electrical engineering

Offered by School of Engineering

Course Fees

Course fee is payable upon acceptance. It is inclusive of 7% GST and subject to review.

_x000D_

_x000D_

For more information on other subsidies, please click here.

_x000D_

_x000D_
_x000D_
*Enter SME in the promo code during course application._x000D_

_x000D_

_x000D_

_x000D_

Applicants / Eligibility Fees
Singaporeans & Permanent Residents$192.60
Singaporeans qualified for SkillsFuture Mid-Career Enhanced Subsidy$72.60
Singaporeans and Permanent Residents qualified for Enhanced Training Support for SMEs*$72.60
Full Course Fee$642.00